ACCESSORIES – CONTROLLINO

Screwless Terminal Block Plug (20 Position)

Gunther — Mon, 25 Jul 2022 09:22:40 +0000

With our new screwless terminal block plugs, you are getting a way easier method of connecting wires to the pin headers, without the need to use classic jumper wire cable connectors. A pure cable is enough. Plus: The block plugs guarantee a high retention of the wire as well as optimal contact.

The installation of the screwless terminal block plugs is easy too (for Controllino MEGA only!):

Plug in the screwless terminal block plug into the pin header.
Push down the orange button and press the cable into the screwless terminal block plug.

Screwless Terminal Block Plug (26 Position)

info_ua392tt9 — Wed, 08 Apr 2020 10:26:04 +0000

The installation of the screwless terminal block plugs is easy too:

Place the included pin header adapter into the pin headers. Push them slightly into This guarantees that you will use the right orientation.
Plug in the screwless terminal block plug into the pin header.
Push down the orange button and press the cable into the screwless terminal block plug.

CONTROLLINO Training Kit

info_ua392tt9 — Sun, 29 Mar 2020 10:54:16 +0000

The CONTROLLINO Training Kit is perfect for Controllino and PLC education, as well as training for learning, testing, and simulation. Perfectly suitable for IHK exam preparation or just for “learning by doing”.

The included exercises (in learning card format) support you from the creation of a program to the testing and validation of the functions. The available sensors on the Controllino training board can be switched on or off as required. Up to 8 push buttons / latching switches, 4 analogue value transmitters (0-10 Volt) and a pulse generator (2-1000 Hz, linear) are available. 8 LEDs and a buzzer serve as actuators.

The set contains the following components:

Controllino Maxi Automation
Controllino Training Board
Interface Module Traffic Lights (Simulation of a traffic light control)
Interface Module 1 (for connecting external sensors, actuators and third-party modules)
24V Power Supply
Case (industrial quality plastic case and foam with ESD protection)

Available Lessons:

PLC Training Level 100 (Beginner)
T 100: AND, OR, NOT
T 101: NAND, NOR, XOR
T 102: Flip Flop, Impluse Relay
T 103: On-Off-Delay
T 104: Pulse Generator
T 105: Cross Circuit
T 106: Logical Connection

PLC Training Level 200 (Basic)
T 200: Patient Call
T 201: Hall Light
T 202: Ramp
T 203: Direction of rotation control
T 204: Star Delta Circuit
T 205: Fill level monitoring
T 206: Fill level monitoring 2
T 207: Logo Display
T 208: Analog Value Display
T 209: Servo Motor Control
T 210: Pulse Duration Modulation
T 211: Escalator

PLC Training Level 300 (Advanced)
T 300: Parking Lot
T 301: Running Light
T 302: Counter
T 303: Crane
T 304: Conveyor Belt
T 305: Parking House
T 306: Reverse Vending Machine
T 307: Radiator
T 308: Room Radiator
T 309: House Radiator
T 310: Awning Control

DIN Rail Mounting Replacement Part

info_ua392tt9 — Fri, 20 Mar 2020 13:21:42 +0000

Replacement Part for CONTROLLINO DIN Rail Mounting

Including 2 Pieces
Easy and quick replacement if your DIN Rail Mounting is broken

Please check the product images for more information on replacement.

Phoenix Contact Relay Module – RIF-2-RPT-LDP-24DC/4X21

info_ua392tt9 — Mon, 13 Jan 2020 13:47:54 +0000

Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 2 PDTs. Input voltage: 24 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.

Phoenix Contact Relay Module – RIF-3-RPT-LDP-24DC/3X21

info_ua392tt9 — Mon, 13 Jan 2020 13:47:53 +0000

Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 3 PDTs. Input voltage: 24 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.

Phoenix Contact Relay Module – RIF-1-RPT-LDP-24DC/2X21

info_ua392tt9 — Mon, 13 Jan 2020 13:47:52 +0000

Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 1 PDT. Input voltage: 24 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.

Phoenix Contact Relay Module – RIF-0-RPT-12DC/21

info_ua392tt9 — Mon, 13 Jan 2020 13:47:51 +0000

Pre-assembled relay module with push-in connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 PDT. Input voltage: 12 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.

Phoenix Contact Relay Module – RIF-0-RPT-12DC/ 1

info_ua392tt9 — Mon, 13 Jan 2020 13:47:51 +0000

Pre-assembled relay module with push-in connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 N/O contact. Input voltage: 12 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.

Phoenix Contact Relay Module – RIF-0-RPT-24DC/21

info_ua392tt9 — Mon, 13 Jan 2020 13:47:50 +0000

Pre-assembled relay module with push-in connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 PDT. Input voltage: 24 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.